Figure 2-20: Time Zone Page - Compaq StorageWorks SAN Director 64 Installation Manual

2–34 SAN Director 64 Installation Guide
Figure 2–20: Time zone page
3. Use these steps to change the time zone.
a. Select the appropriate time zone from the drop-down list at the top of the dialog
box.
b. If instructed by the customer's system administrator, select the Automatically
adjust clock for daylight saving changes checkbox.
c. Click Apply. Record time zone and daylight savings information for reference.
4. At the Date/Time Properties dialog box, click the Date & Time tab. The dialog box
displays with the Date & Time page open.
5. Use these steps to change the date and time.
a. Select the month from the drop-down list under Date.
b. Click the up or down arrow adjacent to the year field and select the desired year.
c. Click the day on the calendar to select the desired date.
d. Click in the time field and enter the desired time, then click the up or down arrow
and select AM or PM.
e. Click Apply.
6. Click OK to close the Date/Time Properties dialog box.
7. Click the close [X] button at the upper right corner of the Control Panel window to
close the window and return to the Windows NT desktop.