Figure 4-8: Sdcm Installer Window - Compaq StorageWorks SAN Director 64 Installation Manual

c. Click the SD-64 SDCM Version XX.YY.ZZ entry, where XX.YY.ZZ is the desired
version. The Windows NT Save As dialog box appears.
d. Verify that the correct directory path is specified at the Save in field and the correct
file is specified in the File name field. Click Save. The new SDCM version is
downloaded and saved to the SDCM Server or PC hard drive.
e. If the new SDCM version was downloaded to a PC (not the SDCM Server),
transfer the SDCM version file to the SDCM Server by CD ROM or other
electronic means. Continue with step 3.
3. Insert the SDCM Applications into the SDCM Server's CD-ROM drive.
4. Click the Windows Start button. The Windows NT Workstation menu displays.
5. At the Windows NT Workstation menu, select Run. The Run dialog box appears.
6. At the Run dialog box, select the directory path (hard drive or CD-ROM drive) and
filename of the executable file (
button. The directory path and filename display in the Open field.
7. Click OK. A series of message boxes appear as the InstallAnywhere third-party
application prepares to install the SDCM software.
8. Follow the online instructions for the InstallAnywhere program. Click Next, Install, or
Done as appropriate. See
Figure 4–8: SDCM Installer window
9. Reboot the SDCM Server PC.
a. Press Ctrl-Alt-Del to display the Windows NT Logon Information dialog box.
Backing up Configuration Data and Upgrading Firmware
SDCM_ServerInstall.exe
Figure 4–8.
4–13
) using the Browse