Figure 2-31: Configure Ports Check Boxes - Compaq StorageWorks SAN Director 64 Installation Manual

Figure 2–31: Configure Ports check boxes
c. Click the 10-100 km checkbox to enable extended distance buffering for a port. A
check mark in the box indicates the extended distance operation up to
100 kilometers (through repeaters) is enabled.
d. Click the LIN Alerts checkbox to enable or disable LIN alerts for a port. A check
mark in the box indicates alerts are enabled. When the feature is enabled and an
incident occurs on the link, an alert indicator (yellow triangle) displays at the
Hardware View, Port List View, and Port Card View, and a message is sent to
configured e-mail recipients. LIN alerts are enabled by default.
e. Select a Type field and choose generic port (G_Port), fabric port (F_Port), or
expansion port (E_Port) from the list box. If F_Port or E_Port is selected, the port
will only operate as the port type selected. If G_Port is selected, the port type is
automatically detected and will operate as an E_Port or F_Port.
2. Use the vertical scroll bar as necessary to display additional port information rows (up
to 64 ports).
3. Click the Activate button to save the configuration information and close the dialog
box.
Installing and Configuring the SAN Director 64 2–49