Guidance Options; Pause; Remark A; Shift - Ag Leader EDGE User Manual

Note: Guidance extends beyond the end of curved swaths. This makes it possible to get LED guidance back
onto the swath if the vehicle drives past the end of a swath. The extended swath lines do not appear on screen.
G O
UIDANCE PTIONS
The Options button on the Guidance Screen becomes active after you have set an AB line. The
Options button opens the Guidance Options screen. The appearance of the Guidance Options screen
varies, depending upon the pattern type you have selected. Three Guidance Options features described
here and on the following page include Pause, Remark A and Shift.

Pause

The Pause button allows your display to stop logging points along an AB Line. Once this button is
pressed, a Resume button will take its place until you press this button and Pause reappears.
Note: If you are using the display to follow a set AB Line and wish to temporarily deviate from this line, you
can use the Pause button to pause the display's logging activity. This feature could be used, for example, by
a vehicle operator who must refill a sprayer. When paused, the display will continue to give the distance back
to the original pause point position.
1. Press Pause button
Press the Pause button on the Guidance screen. When you do so, the place where you paused appears
on the Map screen as a yellow ball.
Note: You can pause a pattern even if you have not set the "B" point yet. If you do so, the message in the
lightbar will read "Need B." If you pause the pattern after you have set your AB Line, then the lightbar will
indicate the distance your vehicle must travel to return to the pause point.
2. Press Resume button
To resume your pattern, press the Resume button to resume logging on your AB line.
Note: If you press the Resume button before you have returned to the original AB Line, your display will
select the closest AB Line to your vehicle.

Remark A

If you chose Straight AB or A+ Heading as your pattern option at the New Pattern screen, the Remark
A button appears on the Guidance Options screen. The Remark A button "re-marks" the A point by
moving it to the current position while maintaining the same heading. A brief message appears in the on-
screen lightbar, stating "Point A Remarked."

Shift

For an explanation of the Shift Pattern feature, see

Adaptive Curve

If you chose Adaptive Curve as your pattern option at the New Pattern screen, see
and
page 38 "Adaptive Curve" on page 46
screen. This button opens the Adaptive Pattern Options screen. At this screen, you can choose pattern
options that tell the system where to log a new pass. These options include:
• New Pass.
This sets the conditions for the display to log a new pass. Select either Area Count or Heading Change.
"Load Pattern" on page 43
. The Adaptive Curve button appears on the Guidance Options
.
"New AB Pattern" on
47