Setup; System Functionality; Home Screen - Ag Leader EDGE User Manual

S
ETUP
S
ETUP
S F
YSTEM UNCTIONALITY
2. Equipment Operating Configuration.
For more information, see the configuration information described in each Operations chapter (for example,
Planting, Application, Tillage, etc.).
3. Product setup.
For more information, see the configuration information described in each Operations chapter.
4. Start Field Operation.
For more information, see
H S
OME CREEN
• Diagnostics button
Opens screens that display Device Information, Memory, Display, and module diagnostics.
For more information, see
The Start Field Operation button, the top center button which shows the Grower Farm and Field, opens
the Field Operation Wizard where you can enter information relating to your Growing Season, Grower,
Farm, Field, Crop Type and Product. For more information, see
• Setup (wrench) button
Opens the Setup screen. For more information, see
Prior to setup, most of the functionality of the display is not
available until the basic setup process is completed, and the
Home screen will look like the picture below. The Run Time
Environment is not accessible, because the Map button does
not appear on the task bar at bottom.
You must complete these initial configuration steps for the Run
Time Environment to be active:
1. Grower, Farm, and Field management.
For more information, see
"Start Field Operation" on page 17.
After a Grower, Farm and Field has been selected, the Home
screen will appear as shown. Specific functions available at the
Home screen are described in the table below.
"Diagnostics" on page 24.
"Management" on page 10.
"Field Notes" on page 16.
"Setup Screen" on page 10.
9