About Guidance Patterns; A+ Pattern - Ag Leader EDGE User Manual

Width, enter the new number using the numeric keypad. Press the blue right-arrow button to continue.
numeric keypad to select the number of rows you wish to shift. Next, use the second numeric keypad to
select the row spacing in inches that you wish to shift the pattern. Use the bottom drop-down menu to
enter the direction, (either left or right), which you wish to shift the pattern relative to the AB Line. When
finished, press the green check mark box
A G
BOUT UIDANCE
The following pages define available guidance pattern other than a SmartPath or Straight AB Line.
• For a description of a Straight AB line, see
• For a description of SmartPath, see

A+ Pattern

3. Follow the AB line for guidance down the first swath.
4. Turn left or right for the next swath. The next swath is automatically selected.
5. Steer the vehicle so that you center the green lights in the lightbar as you drive forward along the swath.
44
2. Select a Pattern
The Load Pattern screen appears, as shown. Select and highlight
the desired pattern. If the pattern you selected was an AB Line, that
pattern now appears on the Map screen. Press the green check
mark box to continue.
3. (Optional) Enter Guidance Width
The Shift Pattern screen appears. The default Guidance Width is
shown, based on the Implement Width that you specified in
Implement Configuration. If you wish to change this Guidance
4. Select Shift Pattern
The Shift Pattern screen appears.
• If you have chosen the Shift by Distance option, use the numeric
keypads to select the distance, in feet and inches, that you wish to
shift the pattern. Use the bottom drop-down menu to enter the
direction, (either left or right), which you wish to shift the pattern
relative to the AB Line. When finished, press the green check mark
box.
• If you have chosen the Shift by Rows option, use the first
P
ATTERNS
"New AB Pattern" on page 38.
"SmartPath" on page 40.
Similar to an AB line, an A+ line is also a straight line. It is defined by a
single point on the line (the A point) and the heading of the line. Use this
pattern when you wish to make a straight line based on a compass
heading. The A+ line extends 1 mi (1.6 km) before and after the A point.
1. At the Guidance Screen, press the New Pattern button. Choose
Straight AB, and enter a swath width. Press the Use A+ Heading check
mark box and enter in a degree number. Press the green check mark box
when finished. You will automatically return to the Map screen.
2. To map the start of the first swath, map Point A. The heading of the
AB line equals either the previous AB heading of the manually-entered
heading (if the current vehicle is within plus or minus 90 degrees of the
AB heading). Otherwise, the A+ heading is in the opposite direction.