Auxiliary Input Settings - Ag Leader EDGE User Manual

A I
UXILIARY NPUT
The Master Switch drop down menu controls the master switch for your entire configuration. You may
see the following options underneath this menu:
• Switch
Controls the master switch.
• External 2
This setting can control an optional, floor-mounted master switch.
• External 1, 3 & 4
Not used at this time.
The F1-F11 cells can be assigned to any implement sections. You can use these to choose the switches
that control a particular section. From here, you can also make the following changes to the switch
settings.
• Add a switch setting.
For more information, see
• Remove a switch setting.
• Reset All switch settings.
This resets the settings to defaults.
2. Press the Calibrate Distance button
The Speed Sensor Calibration wizard appears.
3. Follow the on-screen wizard's instructions
Complete the distance calibration procedure.
S
ETTINGS
To view Auxiliary Input Settings, go to the Application Setup
Configuration Tab and press the Wrench button. At the
Configuration Settings screen, press the Aux Input button,
and the Auxiliary Input Settings screen appears.
This Switch Mapping function is active only for users with
DirectCommand or SeedCommand features. The Auxiliary
Input Settings screen displays settings for the Master Switch
and other switch inputs.
"Add Auxiliary Input Settings" on page 106.
105