Rate Screen: Liquid Flow/Pressure; Rate Screen: Spinner Spreader Settings; Spinner Spreader Product Settings - Ag Leader EDGE User Manual

R S
ATE CREEN
DirectCommand users applying liquid products can use the bottom active area of the Rate Screen to
view settings for Flow, Main Pressure, and Agitator Pressure. This screen also displays the Serial
Number of your DirectCommand Liquid Product Controller.
R S
ATE CREEN
CAUTION: Changing any of these settings in the display does not make the needed adjustments on the
product applicator. Setting value and physical setting on the spinner bed must be verified for correctness
prior to any product application.
• Information on Product Settings is described on
• Information on Spreader Control settings is described on see

Spinner Spreader Product Settings

Spinner Spreader Product Settings can be accessed by pressing the Product Settings button, located
at the bottom active area of the Rate Screen.
Notes:
• Each of these settings described below, and at
individual Product Channel (bin).
• Changing any of these settings in the display does not make the needed adjustments on the product
applicator. Setting value and physical setting on the spinner bed must be verified for correctness prior to
any product application.
132
: L F
IQUID LOW
: S S
PINNER PREADER
DirectCommand users applying granular products with a
Spinner Spreader can use the bottom active area of the Rate
Screen to view Fan Speed, adjust Product Settings and
Spreader Control settings.
The Rate Screen below is shown for a two-channel Spinner
Spreader. The channel that you wish to view is shown in a bin-
shaped icon placed between two wedge shapes.
/P
RESSURE
S
ETTINGS
"Spinner Spreader Product Settings" on page 132.
"Spreader Control" on page 133.
"Spreader Control" on page 133
, must be set for each