Mounting The Display; Mounting Components - Ag Leader EDGE User Manual

Mounting the Display

Mount the display to a secure support inside the vehicle cab. The following must be considered when
choosing a mounting location.
• The display must be readily accessible to the machine operator.
• The display must not obstruct the machine operator's normal driving view.
• The display must not interfere with or limit access to any of the existing machine controls.
• The display CAN system cabling be routed and secured without interfering with existing machine controls.
WARNING: If drilling holes is required during the mounting process, care must be taken to insure that
damage is not done to existing vehicle wiring, mechanical, or cab structure. Refer to vehicle manufacturer
documentation for specific details on your equipment. Follow all OEM instructions, cautions, and warnings
when working around equipment.

Mounting Components

1. RAM Base, PN 4000280
2. RAM Arm - 5", PN 4000279
3. 2"X6" Base, PN 400187
6