Choose Existing Lines Within Smartpath; Smartpath Guidance Options - Ag Leader EDGE User Manual

Hide thumbs Also See for EDGE:

Table of Contents

Once the AB line is created you can switch between the AB line and SmartPath patterns by pressing the

AB/SmartPath toggle.

A-B/SmartPath Toggle

• Curved Lines

• Straight AB Line

Choose Existing Lines Within SmartPath

You can create up to 10 different AB lines within SmartPath. Select the desired AB line by

pressing the A-B button on the Guidance Screen. The AB Manager Screen appears, which

shows all AB lines created within a particular field. An example is shown.

SmartPath only creates a SmartPath pass when you are logging data in the field. However, you have the

option of using it to create SmartPath passes continually during all field operations.

To adjust this setting, press the Options button on the Guidance screen. At the Guidance Options

screen, press the Smart button. The SmartPath Options screen appears, as shown.

After the Guidance System has switched over to a different

path, the name of the currently-followed pattern is shown

within a black box on the Map Screen.

• Highlight the desired AB line, then press the green check

mark button to close the screen.

• Press the New button to add an AB line.

• Press the Load button to load an AB line.

• Press the Edit button to edit the name of an AB line.

• Press the Remove button to remove an AB line.

Notes:

• The default setting is Logged Area. This setting only creates

passes when you are logging field data.

• By selecting All Area Covered, you can create SmartPath

passes even when not logging field data.

• The Heading Threshold setting is the available area that the

Guidance System uses to search for previously-created SmartPath

passes. The default setting is 20 degrees.

Table of Contents