How To Find Information You're Looking For; Display Hardware; Installation Instructions - Ag Leader EDGE User Manual

H F I
OW TO IND
What do you do if you cannot find the information that you're looking for? There are three different ways
at your disposal to find specific information quickly. These steps can include:
1. Look up the information in the Table of Contents.
2. Look up the information in the section indexes that are located at the end of each manual section
(Planting, Tillage, Application, and Harvest).
3. Use the Adobe Reader's search function. While viewing this manual online in PDF format, press the
CTRL+F buttons on your keyboard. A search menu should appear, and from here, you may enter in a
search term.
D H
ISPLAY ARDWARE
Front
• (A) Compact Flash Card Slot
The compact flash card slot has a sensor that allows the display to know when the door is open or closed.
If the door is opened when a card is in the display, an on-screen warning will appear indicating when the
card can safely be removed. The display comes with a compact flash card. The compact flash card will be
required to transfer files from the display to a desktop computer.
• (B) RAM Mount
For more information, see
• (C) 28-Pin Connector
The 28-Pin round connector contains CAN, RS-232 serial, and system power and ground connections.
• (D) Speaker
The built-in speaker is used for audible warnings. The speaker volume can be adjusted through the display
setup routine.
• (E) Power/Reset Switch
The Power/Reset switch is used for turning the display on and off in installations where the system is
connected to a continuous power supply. If the display ever stops responding, the manual power switch
may be held in for five seconds to restart the system. Only do this as a last resort, data loss could occur
during times of improper shutdown.
I I
NSTALLATION
All machine installation and mounting kits are shipped with instructions specific to that kit. Instructions
include special details relating to mounting, wiring and display configuration.
Y
NFORMATION
"Mounting the Display" on page 6.
NSTRUCTIONS
' L
OU RE OOKING
Back
F
OR
5