Autoswath - Ag Leader EDGE User Manual

A S
UTO WATH
The Automatic Swath Control feature turns boom sections off and on automatically based upon the
following conditions:
• Entering and exiting internal and outer field boundaries.
• Entering and exiting previously-applied areas within a field.
Note: The Automatic Swath Control functionality is an optional feature of both the DirectCommand and
SeedCommand Systems. An unlock code must be purchased and installed to enable this feature. Call your
local dealer for details and pricing.
• Turn-On Look- Ahead
This setting determines how far ahead the system looks to turn the boom sections on. This setting
compensates for delay in the product control system when the implement sections are turned on.
• Turn-Off Look-Ahead
This setting determines how far ahead the system looks to turn the sections off. This setting compensates
for delay in the product control system when the sections are turned off.
• Outside Boundary Option
Select one of the two options to determine system behavior when a section exits a field boundary or
prescription mapped area.
5. Save Switch Functions
The new switch settings appear in the lower left-hand portion of the
Auxiliary Input Settings screen, as shown. Press the checkmark
box to save these settings.
6. Fence row nozzle indicators on Map Screen
After completing these Auxiliary Input Settings changes, the Fence
Row Nozzle Indicators (A), which are shaped like triangles,
appear on either side of the sections behind the vehicle icon, as
shown.
To access the Automatic Swath Control settings, go to the
Configuration Tab, highlight a configuration and press the
Wrench button. Once the Configuration Settings Screen
appears, press the AutoSwath button. The Automatic Swath
Control screen appears, as shown. This screen displays
Automatic Swath Control settings that are specific to that
operation.
107