Miscellaneous Items; Fertilizer Default Product Settings - Ag Leader EDGE User Manual

3. Press the Add button to start the process of adding components to the fertilizer blend.
Note: Any liquid herbicides set up within the system can be added to create an impregnated blend product.
4. Select the desired component from the list box. New components can be set up at this time if required.
5. Enter the amount of the first component.
6. Press Add to start adding an additional component. (A dry mix can contain up to seven individual
components.
Note: The remaining Base Amount that is available after adding product components is shown at the bottom
of the on-screen list box.
7. Select the second component for the dry mix, and enter the base amount of the second component.
Press the blue right-arrow button after the final blend component has been added.
8. Enter Manufacturer name if applicable.
Use the on-screen keyboard to enter a unique name for the blend. Press the checkmark box to complete
the process of setting up the dry blend. The new Dry Blend now appears in the Product List.
M
ISCELLANEOUS
F D
ERTILIZER EFAULT
Material Type
Liquid
Anhydrous
under
Ammonia
pressure
28% UAN Liquid
30% UAN Liquid
32% UAN Liquid
Ammonium
polyphosphate Liquid
(starter)
I
TEMS
P S
RODUCT
Percentage (in terms of lbs./100
lbs)
Abbreviated
name for
display and N
predefined
name for SMS
NH
82
3
28% UAN 28
30% UAN 30
32% UAN 32
Ammonium
10
polyphosphate
ETTINGS
P (P 0 ) K (K 0)
2 5 2
0 0
0 0
0 0
0 0
34 0
Density
5.14
lbs./gal. (at
60 F)
10.67
lbs./gal.
10.86
lbs./gal.
11.06
lbs./gal.
11.73
lbs./gal.
115