Diagnostics - Ag Leader EDGE User Manual

D
IAGNOSTICS
The Harvest Diagnostic Tab includes the following information:
• Flow Rate
Grain flow rate, shown in kilograms per second.
• Flow Max, Flow Min and Flow Offset
Raw flow values used for diagnostic purposes.
• Sensor Force
Force of grain flow, shown in Newtons.
• Header Raw
Raw value of header sensor.
• Speed Pulses
Shows the number of ground speed pulses from the combine.
• Moisture Raw
Raw value of moisture sensor.
• Temperature
Air temperature, shown in Celsius.
• Temperature Raw
Raw value of temperature sensor.
• Proximity Sensor
Shows if Elevator Mount Unit sensor is covered with grain.
• Relay Status
Shows on or off.
• Motor Current
Measure of Elevator Mount Unit (EMU) current, shown in amps.
Harvest Diagnostic Notes
• For generalized Diagnostic information, such as memory, display, CAN device and firmware version
information, see
• For more information on LED diagnostic states, see
184
Pressing the Harvest Display Item on the Harvest Screen
summons the Harvest Diagnostics screens that pertain to your
configuration (For an example, see illustration at
Screen - Active Display Items" on page 170
may request that you look at these screens for help in
diagnosing a problem. When performing a Harvest operation,
you can access the Harvest Diagnostic screen, as shown.
"Diagnostics" on page 24.
"Module LED Diagnostic States" on page 186.
"Harvest
). Technical support