Application Map Screen Items; Run Time Environment: Rate Screen; Target Rate - Ag Leader EDGE User Manual

• (I) Target Rate
• (J) Vehicle Icon
(K) AutoSwath
A M
PPLICATION
• Status Items: Target Rate (A) and Actual Rate (B)
Two items, Target Rate and Actual Rate, appear in the Status Items box at the top right-hand corner of the
Map Screen. As with the Legend, the Status Items are only accessible in the Zoom to Extent view.
• Container Level (C)
The Container Level Status Item allows you to view the amount of product remaining in your container. For
more information, see
• Rate Button
The Rate Button summons the Rate Screen, where you can view settings related to Target Rate, Tank
Volume, and Flow/Pressure. For more information, see
Note: For an explanation of display items not listed above, see
R T E
UN IME
You can view the Rate screen by pressing the Rate button, as shown at left. The Rate
Screen has three active areas: Target Rate, Tank Volume, and the third area shows
Flow/Pressure (for Liquid applications) and Bin (for Spinner Spreader applications). These
items are explained on this and following pages.

Target Rate

The Target Rate screen will appear for all target rates being applied.
S I
AP CREEN TEMS
The following Application Map Screen Items are available for
DirectCommand users at the Map Screen:
"Rate Screen: Container Level" on page 130.
NVIRONMENT
•
• (A) GPS Status
• (B) Total Field Acres
• (C) Status Items Target Rate / Actual Rate
• (D) Ground Speed
• (E) Container Level
• (F) Map Options
• (G) Home
• (H) Map View
"Run Time Environment: Rate Screen" on page 129.
"Map Screen Icons" on page 19.
: R S
ATE CREEN
129