Nudge; Ontrac2 - Ag Leader EDGE User Manual

- Area Count generates the next pass, based on coverage area of the previous pass. The display must
be logging coverage data in order to generate the next pass.
- Heading Change logs the next pass when the vehicle turns past the heading threshold.
• Heading Threshold.
Enter in the degree of turning angle that your vehicle will need to make before creating another pass.
Note: You should always set the Heading Threshold number past 90 degrees. The default number is 110
degrees.
N
UDGE
Note: The Nudge setting is only available with SmartPath, AB, A+ and Pivot patterns.
O T 2
N RAC
Access the OnTrac2 guidance feature by pressing the Setup button (wrench) on the home
screen
Then press the GPS button on the Setup Screen.
Then the Guidance tab will appear.
From the Guidance/Steering Type menu, select OnTrac2 Steering.
Acknowledge the Automatic Steering Liability Notice by pressing Accept, and wait for the steering
software to initialize.
48
You can adjust Nudge settings at the Guidance Screen,
shown. The blue double arrows allow you to adjust the AB Line
by the specified distance left or right.
Pressing the Options button opens the Guidance Options
screen, which is discussed at
Pressing the Nudge button on the Guidance Options screen
opens the Nudge screen, as shown.
• Use the numeric keypad to enter a distance to move the swaths.
• To clear out the adjustment and go to the original position, press
Clear Nudge.
"Guidance Options" on page 47
.