Table of Contents
Advertisement
H
S
ARVEST
• Configuration Tab
The Configuration Tab is where you can add and edit operating configurations. For more information, see
"Create a Harvest Configuration" on page 171 and "Configuration Settings" on page 172.
• Combine Tab
The Combine Tab is where you can set up and configure additional combines. For more information, see
"Combine Tab" on page 173.
• Header Tab
The Header Tab is where you can set up and configure additional headers. For more information, see
"Header Tab" on page 174.
• Crops Tab
The Crops Tab is where you can add and edit crops. For more information, see
• Calibration Tab
The Calibration Tab is where you can perform calibrations. For more information, see
Checklist" on page 178.
C
H
REATE A
To set up a Harvest configuration, you must set up a Combine and Header configuration with the
following procedure.
2. Press the Add button
The Operating Configuration Wizard appears.
T
ETUP
ABS
Pressing the Harvest button at the Setup Screen
takes you to the Grain Harvest Configuration Tab. This tab is
shown in front of four other tabs: Combine, Header, Crops
and Calibration.
C
ARVEST
1. Press Harvest button
At the Setup screen, press the Harvest button.
The Configuration Tab opens, as shown.
ONFIGURATION
"Crops Tab" on page 176.
"Pre-Harvest
171
Advertisement
Table of Contents
Troubleshooting
