Table of Contents
Advertisement
• Remove All
This will remove all guidance pattern files from the display's internal memory.
L
S
IGHTBAR
ETTINGS
provided on the display's Map screen to center the vehicle on the AB Line. Select either Chase or Pull.
- If you select Chase, then in order to center the vehicle on the AB Line, you must follow the indicator
lights on the lightbar.
- If you select Pull, then in order to center the vehicle on the AB Line, you must turn the vehicle in the
opposite direction of the indicator lights on the lightbar.
• External Lightbar LED Brightness
If applicable, use the up and down arrows to enter in a number specifying the brightness of the LED lights
on the L160 lightbar. The number 1 is the dimmest setting and 10 is the brightest; the default setting is 5.
G
UIDANCE
Display users can use either Manual Guidance, OnTrac2, or ParaDyme for guidance operations. The
setup procedures and use are explained below. Lightbar operation and pattern information applies to
users of the Manual Guidance, OnTrac2 and ParaDyme features.
O
-S
L
N
CREEN
light indicates (for example, 6 inches or 1 foot).
• (C) Pass Number
The number of passes (either right or left) from the AB Line.
36
To adjust lightbar settings, press the Lightbar Settings button
on the Manual Guidance screen. The Lightbar Settings
screen appears, as shown.
• LED Spacing
Enter in an amount specifying the distance represented by each
square of the lightbar. You can enter in a number ranging between
6 and 72 inches.
• Mode
This determines which method to use the GPS information
F
UNCTIONS
IGHTBAR
The on-screen lightbar is an option for users who have not
purchased an external lightbar. This on-screen lightbar will not
appear if you are using an external lightbar.
• (A) Cross-Track Error
The Cross-Track Error indicates your vehicle's distance from the
AB Line. This distance from AB Line number shows the length
between the location of your vehicle's GPS antenna and the
nearest point on the closest pass.
• (B) Guidance Lights
The guidance lights indicate directional changes as you steer the
vehicle right or left. You can specify the distance each guidance
Advertisement
Table of Contents
Troubleshooting
