Norac Uc5 Run Time Environment; Boom Height Screen - Ag Leader EDGE User Manual

• Minimum Height
- Soil Mode - The minimum height setting when operating in Soil Mode.
- Crop Mode - The minimum height setting when operating in Crop Mode.
N UC5 R
ORAC

Boom Height Screen

When the NORAC UC5 Spray Height Controller is configured on the display, the Boom
Height button appears on the Task Bar.
icon. Pressing the Boom Icon opens the NORAC UC5 diagnostics screen, where you can view which boom
sections are in Manual or Automatic Mode, and you can also view raw values from the NORAC boom height
sensors.
The numbers that appear below the Boom Icon show the distance between the boom section
and the target.
Indicates the direction that the boom section is being commanded to move. The arrows shown
around the boom appear either 1) In Automatic Mode, or 2) When the boom is in Manual Mode
and the user is manually moving the boom section.
• Mode
Indicates whether the Boom is in Crop Mode or Soil Mode.
• Target Height
The desired boom height above the ground (for Soil Mode), or the crop canopy (for Crop Mode).
• Sensitivity
Adjusts the boom response. Higher values make the height control more responsive.
T E
UN IME NVIRONMENT
By pressing the Boom Height button (A), you can view the
Boom Height screen, as shown.
• Boom Height screen
The Boom Icon appears as blue when in Automatic Mode; and black when in
Manual Mode. The right, left and center sections appear independently on this
153