Create An Application Configuration - Ag Leader EDGE User Manual

• Implement Tab
The Implement Tab is where you can add and edit implements. For more information, see
on page 110.
• Controller Tab
The Controller Tab is where you can add and edit controllers for use during application. For more
information, see
"Controller Tab" on page 111.
• Product Tab
The Product Tab is where you can and edit crop nutrient and protection products. This tab contains a list
of pre-defined products and allows configuration of tank mixes and fertilizer blends. For more information,
see
"Product Tab" on page 112.
C
REATE AN
To set up an Application configuration, you must set up Vehicle, Implement, Controller and Products with
the procedure described on this page.
1. At the Setup screen, press the Application button.
3. Press the Add button
The Operating Configuration Wizard appears, as shown.
• Configuration Tab
The Configuration Tab is where you can add and edit operating
configurations. For more information, see
Configuration" on page 101
page 103.
• Vehicle Tab
The Vehicle Tab is where you can add and edit vehicles. For more
information, see
A
PPLICATION
2. The Configuration Tab opens.
and "Configuration Settings" on
"Vehicle Tab" on page 108.
C
ONFIGURATION
"Create an Application
"Implement Tab"
101