Product Settings; Product Options - Ag Leader EDGE User Manual

• Edit Legend
The Edit Legend button allows you to change the legend associated with the selected product. For more
information, see
"Edit Legend" on page 21.

Product Settings

• Manufacturer
Enter the Manufacturer and Common Name, if desired.
• EPA Number
Enter the EPA Registration Number which is listed on the product's container label.
• Restricted Use Pesticide
If the product is a Restricted Use Pesticide, press the check box. This information will also be included for
your records.
P O
RODUCT PTIONS
The Product Options screen is where you can add or import products, or add product mixes.
To go to the Product Options screen, press the Add button on the Product Tab. The Product
Options screen appears, as shown. Choose from the following options described below.
• Add Product Mix
Adds a mix of products, either a tank mix or dry blend. For more information, see
and
page 114 "Dry (Granular) Fertilizer Blend Setup" on page 114.
• Import Product
Imports a Management Setup File (.msf) from desktop software. Follow the steps in the wizard to enter the
Product, Type and Units and Density of the Product. Enter the EPA Registration Number (if necessary), the
Manufacturer and Common Name, and the Product Name.
The Product Settings screen is where you can edit product
information for an existing product in the Product List. To view
the Product Settings Screen, first go to the Product Tab,
highlight your product configuration, press the Wrench Button
and after the Product Screen opens press the Edit Info button,
as shown at left. The Product Settings Screen appears, as
shown.
• Add Product
Adds a single component product type. Here you must choose a
single component product from any pre-defined types that can be
created and added to the Product List. After initial setup, single
component products can be used individually within the display, or
can be combined to create dry blends and liquid product mixes. If
you are creating a Restricted Use Pesticide, enter the EPA product
registration number and select the RUP check box where
appropriate.
"Tank Mix Setup" on
113