Ag Leader EDGE User Manual page 32

The Engage icon shows that the OnTrac2 autosteer system is on, off, or off but ready to engage. The
appearance of this icon displays the following:
• Engage - On Green
autosteer system is on.
• Engage - Ready Grey
autosteer system off but ready to engage.
• Engage - Off Grey with a red circle and slash
autosteer system is off and unable to engage.
For more information, see the Guidance chapter at
The Map Options icon is used for numerous purposes. With this button, you can create
boundaries or place Field Markers. For more information, see
and
"View Map Markers" on page 23.
Display Legend Icon - Off
Display Legend Icon - On
The Display Legend icon shows the Rate Display.
• If off, the Display Legend icon appears with the arrow pointing to the top and a grid within its border.
• If on, the Display Legend icon appears with the button pointing down and no grid within its border.
Vehicle Icon - Zoom to Extent
The Vehicle Icon is shown by an arrow inside a circle if the Map Screen is viewed in Zoom to
Extent.
The vehicle appears as a gold-colored triangle if the Map Screen is viewed in Zoom Detail. The
appearance of the zoomed-in icon changes depending upon the data being logged in the field. The
Zoom Detail changes the Map Screen's appearance so that the vehicle icon is always shown pointed to
the top.
• Vehicle Icon - Not logging
If the vehicle is not logging data, then the implement icon appears as a grey bar, as shown
at the picture at right
20
• Vehicle Icon - Logging
If the vehicle is logging, the implement icon appears as a green bar behind it, as shown
at far left.
• Vehicle Icon - with sections
If the vehicle is logging data from an implement split into sections, (for instance during
a planting or application operation), then these sections appear in the implement icon.
For an example, see the middle picture.
.
"Guidance" on page 35
"Create a Boundary" on page 22