Planting Map Screen Items; Run Time Environment: Rate Screen - Ag Leader EDGE User Manual

• (A) Total Acres
• (B) GPS Status
• (C) Map Options
• (D) Home
• (E) Map View
• (F) Rate Button
• (G) Vehicle Icon
• (H) Implement Icon
• (I) Ground Speed
• (J) Status Items: Target Rate + Actual Rate
• (K) AutoSwath
P M
LANTING AP
The following Planting Map Screen Items are available for SeedCommand users at the Map Screen:
• Status Items: Target Rate and Actual Rate
This only appears on Hydraulic Drive configurations. For more information, see
Rate Screen" on page 79.
• AutoSwath Button
This button appears for all SeedCommand configurations, including Row Shutoff and Hydraulic Drive
configurations. For more information, see
Note: For an explanation of display items not listed above, see
R T E
UN IME
You can view the Rate screen by pressing the Rate button, as shown at left.
S I
CREEN TEMS
Target Rate (A) and Actual Rate (B), appear in the Status Items box at the
top right-hand corner of the Map Screen. As with the Legend, the Status
Items are only accessible in the Zoom to Extent view.
• Rate Button
"Run Time Environment: Rate Screen" on page 79.
NVIRONMENT
"Map Screen Icons" on page 19.
: R S
ATE
The Target Rate screen will appear for all target rates
being applied. Items that appear on this screen are
explained on this and the following pages.
• Target Rate
The Target Rate is the amount of seeds that you wish to
plant.
• Actual Rate
The Flow Sensor returns the actual rate of the seeds that
you are planting.
"Run Time Environment:
CREEN
79