Rate Screen: Container Level; Tank Fill - Ag Leader EDGE User Manual

Note: In some conditions, the Actual Rate may increment slower than the Target Rate, or its numeric values
may vary before matching the Target Rate.
• The Rate 1 and Rate 2 settings represent preset application rates that allow operators to quickly change
between desired target rates for each individual product.
• The Manual Valve Control button, as shown at left, allows operators to specify the
position of the control valve. Operators use this option to prime the system before
application or clean out equipment at the end of the day.
R S
ATE CREEN
When filling or emptying your container, you can use the Container Level portion of the Rate Screen to
update the amount of product that exists in the machine's containers.

Tank Fill

The Tank Fill button, as shown at left, increases the container level logged in the display to
the maximum volume that you specified in the Container Setup Wizard shown in the
Configuration procedure.
130
• Target Rate
The Target Rate is the amount of product that you wish to apply.
• Actual Rate
The Flow Sensor returns the actual rate of the product that you
are applying.
: C L
ONTAINER
Container (Shown Partially Full)
Container (Shown Empty)
EVEL