Controller Tab; Controller Settings (Directcommand) - Ag Leader EDGE User Manual

3. Enter Forward or Backward Distance from Hitch Point
Use the numeric keypad to enter the distance from front hitch, if present, to rear hitch point. Press the
checkmark box when complete. (This option will not be present on self-propelled vehicles.)
Note: Accuracy when measuring and entering swath section GPS offsets is required to ensure proper
machine performance.
C
ONTROLLER
Note: No settings are available under the Controller Tab that pertain to Area Logging (non-DirectCommand)
application operations.
• Add
Press to add a new controller. A wizard will walk you through setting up the controller.
• Keyboard Button
Press to edit the name of a selected controller from the list.
• Wrench Button
Press to edit Controller Settings, including tabs for Channel 1, 2 & 3 settings, and also Auxiliary settings.
For more information, see
• Remove
Press to remove a controller.
Note: When deleting a controller all data in the regions and configurations using it will be deleted.
C S
ONTROLLER
To view Controller Settings, go to the Controller Tab, highlight the controller, press the Wrench Button,
and the Controller Settings screen appears. The current Device and Serial Number of that Device is
displayed. The buttons shown on this Controller Setting screen varies, depending upon your
DirectCommand configuration.
T
AB
Use the Controller Tab to add and configure DirectCommand
controllers for use during DirectCommand application
operations.
"Controller Settings (DirectCommand)" on page 111.
(D
ETTINGS IRECT
C )
OMMAND
111