6. Power on the servers in the FreeFlow Print Server Rack by pressing the power button
on each unit.
The green colored power indicator light on each server goes from a state of slowly
flashing to a state of steady on.
CiPress System Power Off Procedure
See the
CiPress System Power Overview
Use this procedure when a CiPress System is powered on.
1. On the Primary CiPress Printer UI, ensure that the current state is NOT READY.
2. Select Power > Shutdown.
A confirmation window displays.
3. Select Yes.
A pop-up window displays on the Secondary CiPress Printer UI if a Tandem
Configuration is used.
4. If it exists, on the Secondary CiPress Printer UI, select Shutdown > Yes from the
pop-up window.
5. Wait until the Touch Screen display(s) no longer show an image.
6. Switch the Power Supply Knife Switches to the Off position. The Knife Switches are
located nearby the Printer.
• United States: 480 VAC and 208 VAC
• Europe: 400 VAC and 200 VAC
Note
If performing this procedure as a part of a
seconds before switching the Power Supply Knife Switches back to the On position.
®
Xerox
CiPress 325 / 500 Production Inkjet System
Customer Help Information
prior to performing this procedure.
Printer System
Restart, wait at least 60
Power Management
2-3