Xerox CiPress 325 Customer Help Information page 153

XPE-15-22XX Faults
XPE-15-2284
Remedy:
Ensure that the Image Sensor Glass is
1.
2. Check prints for image quality defects. See
Overview.
3. Run the Register Heads Phase of
4. If the fault continues to occur, contact Xerox for assistance.
XPE-15-XXXX Faults
XPE-15-24XX
Cause: Too Many Missing Jets
Remedy: Perform the Missing Jets Troubleshooting
Procedure.
XPE-15-25XX
Cause: Nearest Neighbor Missing Jets
Remedy: Perform the Missing Jets Troubleshooting
Procedure.
XPE-15-3090 Fault
Cause: An unsupported form length is being used.
Remedy:
1. Set the CiPress to Offline.
2. Reset the error.
3. Reposition all marks to be within the printable area of
the page. See Mark Positioning.
4. Set the CiPress to Online.
®
Xerox CiPress 325 / 500 Production Inkjet System
Customer Help Information
clean.
Image Quality
DC 141 Head Setup.
This fault is related to
marks not fitting on the
form.
Problem Solving
These faults are
related to an
image analysis
failure while
running Color
Patches in Job.
These faults are related
to image quality issues.
5-51