Xerox CiPress 325 Customer Help Information page 98

Operating the CiPress User Interface
8. Cut out both calibration targets along the dashed cutting lines.
Xerox Calibration Target
The lead edge and header of the test pattern.
1
The dashed cutting line.
2
Note
Cut slightly outside of the dashed lines to ensure an accurate reading by the
spectrophotometer.
9. At the computer used for color calibration, ensure that a folder called DC142 exists.
If the folder does not already exist, create it.
Note
If the DC142 folder did not already exist, the network transfer functionality of
10. Open the X-Rite ColorPort software application.
11. Select the Measure Target tab.
12. From the Target drop-down menu, select CiPressCalibrationTargetRev2.
13. From the Measurement Device drop-down menu, select i1iSis.
14. Select the information (i) icon to the right of the Measurement Device drop-down
menu.
15. Select the UV included option.
4-68 ®
Xerox CiPress 325 / 500 Production Inkjet System
Customer Help Information