How To Replace Print Heads From Left Marking Tower - Xerox CiPress 325 Customer Help Information

Maintenance Tasks

How to Replace Print Heads from Left Marking Tower

If there is reason to believe that a Print Head is defective, see the Image Quality Overview
section and follow the appropriate troubleshooting procedures prior to contacting Xerox
support.
Only perform a Print Head replacement if directed.
Caution
Power off the CiPress before removing or replacing a Print Head. Failing to power off
the CiPress will cause damage to the Print Head and Print Box Unit and void the Print
Head warranty.
1. Make sure the print engine is idle and no jobs are currently printing.
2. Open the Print Engine Module Front Left Door.
3. Turn the Control Knob counterclockwise until it is completely loose to release the Left
Marking Tower and move into the Service position.
7-2 ®
Xerox CiPress 325 / 500 Production Inkjet System
Customer Help Information