Maintenance Tasks (Animations) - Xerox CiPress 325 Customer Help Information

Maintenance Tasks
seated, a fault will display during press operation. If so, repeat the power down and
print head alignment process of this procedure.
22. Remove the ground clip from the print bar and remove the ESD wrist strap.
23. Grab the handles and push the Print Box Unit in completely.
24. Close the Right Tower.
25. Rotate the turn knob clockwise until it stops.
26. Restore power to the printer and system. Refer to the instructions.
27. Close the Print Engine Module Front Right Door.
28. Run the DC965 routine and then DC141 routine with all phases selected.

Maintenance Tasks (Animations)

The topics in this section link to animations in the Online Help version of the
documentation. These links are not available in the PDF version.
Refilling the Waterless Ink Barrels
Refer to the Online Help for an animation of this task.
Emptying the Waste Ink Trays
Refer to the Online Help for an animation of this task.
7-16 ®
Xerox CiPress 325 / 500 Production Inkjet System
Customer Help Information