Diagnostics View - Xerox CiPress 325 Customer Help Information

3. Select the Delay field to change the time from the default value of 5:00 (five minutes).
The Delay (min:sec) window displays.
4. Set the time and select Save.
The Automatic Job End Eject time is set.

Diagnostics View

When you select the Diagnostics view on the main screen, the system is placed in a
suspended state so that no other operations can occur. In this special state, the user
area displays the controls that allow Key Operators to:
• Run diagnostic routines critical to maintaining the color and image quality of the
CiPress
• Back up software and settings
• View the diagnostics message display
®
Xerox CiPress 325 / 500 Production Inkjet System
Customer Help Information
Operating the CiPress User Interface
4-59