Table of Contents
Advertisement
Operating the CiPress User Interface
Table 1. (continued)
Circumstance
If the web is changed to a width
greater than the web currently
installed.
If there are excessive amounts
of
Light or Dark Narrow Streaks
approximately 1.3 mm apart.
If lines and text have poor edge
definition.
There is a noticeable difference
in the density between print
heads.
How to Run DC 141 Head Setup
1. Log in as a Key Operator.
Note
Operators and Advanced Operators cannot access the
User Access Levels
for more information.
2. Select the Diagnostics view icon.
3. Select DC 141 Head Setup from the Maintenance column.
4. Select the appropriate phase(s) as directed by a referring procedure or per the
reference table in
DC 141 Head Setup
5. Select Start.
Wait until the CiPress has successfully printed the test pattern before proceeding to
the next step.
Note
Each phase may require multiple iterations to complete. The CiPress UI displays a
green check mark when each phase is complete.
6. Select Close Routine.
DC 142 Color Maintenance Overview
This diagnostic control routine allows for the automatic adjustment of color reproduction
to ensure uniformity between CiPress Printers.
For more information on this diagnostic control, see
4-66
Print Mud
Converge
Register
Page
Roll
Heads
Overview.
How to Run DC 141 Head
®
Xerox
CiPress 325 / 500 Production Inkjet System
Normalize
Correct
Heads
Ydp
Diagnostics
View. See
Changing
Setup.
Customer Help Information
Advertisement
Table of Contents
Troubleshooting
