Xerox CiPress 325 Customer Help Information page 18

Power Management
1
Example of a 208 VAC Power Supply Knife Switch in the On position.
2
Example of a 480 VAC Power Supply Knife Switch in the On position.
3. Power on the Secondary CiPress Printer if it exists using the instructions in the previous
step.
Important
Power on the Secondary or Downstream CiPress Printer within two minutes of
powering on the Primary CiPress Printer.
4. Wait until
CiPress Touch Screen.
Note
The CiPress Touch Screen has no indicator light as to whether it is powered on or
powered off. See CiPress Touch Screen Power Troubleshooting
appear on the Touch Screen within a short period of time.
5. Ensure that the FreeFlow Print Server display is powered on.
2-2
appears in the taskbar of the Primary
if an image does not
®
Xerox CiPress 325 / 500 Production Inkjet System
Customer Help Information