3.
Is the Image Sensor docked fully into position?
Result
No.
Yes.
4.
Check the web settings on the CiPress UI to ensure that they are correct.
Result
The settings are incorrect
for the current web loaded.
The settings are correct for
the current web loaded.
5.
Run dC 965 Head Maintenance.
6.
Run DC 141 Head Setup and select the Converge Roll and Correct Ydp Phases.
Result
A fault occurs.
The diagnostic routine runs
without any faults.
7.
At the post-processing device, remove the last test pattern printed on the web for
analysis.
®
Xerox
CiPress 325 / 500 Production Inkjet System
Customer Help Information
Action
Dock the Image Sensor.
Continue with the next step.
Action
Correct the web settings and continue with the next step.
Continue with the next step.
Select Select All and Start.
Action
Troubleshoot the fault. See
Solving.
Continue with the next step.
Problem Solving
Print Head Fault Code Problem
5-21