Xerox CiPress 325 Customer Help Information page 127

28. Analyze the test pattern print sample.
Result
No image quality defects
are visible.
Multiple Print Heads have
missing jet streaks.
Only one Print Head has
missing jet streaks.
There is another issue
identified in the test pattern
print samples not described
in this checklist.
®
Xerox CiPress 325 / 500 Production Inkjet System
Customer Help Information
Action
Troubleshooting complete. Discard test pattern print samples.
Mark the affected Print Heads on the test pattern print
sample. Write a description on the print sample to
differentiate it from other prints made while following this
checklist. Retain the print sample to send to Xerox if required.
Run DC 965 Head Maintenance again and follow the
instructions in this procedure for printing the
PrintHeadReg_500fpm test pattern and retaining it.
Note
Only repeat this action one time. If the Result does not
change, contact Xerox for assistance.
Mark the affected Print Head(s) on the test pattern print
sample. Write a description on the print sample to
differentiate it from other prints made while following this
checklist. Retain the print sample to send to Xerox if required.
Continue with the next step.
See the Image Quality Defect Diagnosis Section
problem solve the issue.
Problem Solving
to help
5-25