Xerox CiPress 325 Customer Help Information page 125

14. Analyze the test pattern print sample.
Result
No image quality defects
are visible.
Unacceptable missing jet
streaks are visible.
There is another issue
identified in the test pattern
print samples not described
in this checklist.
15. Run dC 965 Head Maintenance.
a) Select Select Recommended and Start if the Color Patches in Job feature was
enabled prior to following the steps in this checklist.
b) Select Select All and Start if the Color Patches in Job feature was not enabled
prior to following the steps in this checklist.
16. Set NVM ID 32345 to a value of 1.
17. Print the PrintHeadReg_500fpm test pattern.
18. Restore NVM ID 32345 to the default value of 0.
19. At the post-processing device, remove two copies of the test pattern printed on
the web for analysis.
20. Analyze the test pattern print sample.
Result
No image quality defects
are visible.
Unacceptable missing jet
streaks are visible.
There is another issue
identified in the test pattern
print samples not described
in this checklist.
®
Xerox CiPress 325 / 500 Production Inkjet System
Customer Help Information
Action
Troubleshooting complete. Discard test pattern print sample.
Mark the affected Print Head(s) on the test pattern print
sample. Write a description on the print sample to
differentiate it from other prints made while following this
checklist. Retain the print sample to send to Xerox if required.
Continue with the next step.
See the Image Quality Defect Diagnosis Section
problem solve the issue.
Action
Troubleshooting complete. Discard test pattern print sample.
Mark the affected Print Head(s) on the test pattern print
sample. Write a description on the print sample to
differentiate it from other prints made while following this
checklist. Retain the print sample to send to Xerox if required.
Continue with the next step.
See the Image Quality Defect Diagnosis Section
problem solve the issue.
Problem Solving
to help
to help
5-23