Powering Off The System; To Power Off The System; Energy Star; Power Saver Mode - Xerox Nuvera User Manual

Hide thumbs Also See for Nuvera:
Table of Contents

Advertisement

Maintaining Your Xerox Nuvera

Powering Off the System

Follow these procedures to correctly power down the machine. While turning the machine on and off
may seem self-explanatory, there are a few conventions to adhere to, in order to avoid damage to the
machine and/or loss of data.

To power off the system

There are two non-emergency methods used to power off.
Preferred power off method
1. In the user interface, click System > Shutdown.
2. Click Yes to shut down the system in an orderly fashion, after all scheduled jobs are processed.
3. Click Interrupt to shut down the system without completing the processing of current jobs.
4. Click No to return to the user interface.
In a few moments, the system will begin an orderly shutdown.
If the preferred power off method is not successful
1. Press the (O) symbol embossed into the button toward the back of the machine to turn the power
off. For the Xerox Nuvera 157/200/288/314 EA/MX Perfecting Production System, access the power
switch on Print Engine A1.
2. Click Yes to shut down the system in an orderly fashion, after all scheduled jobs are processed.
3. Click Interrupt to shut down the system without completing the processing of current jobs.
4. Click No to return to the user interface.
Note
Users should not use Printer Off, since Printer On is only available to System Administrators. If a user
does select it and needs to exit, select Restart and the system will come up to ready.

Energy Star

Refer to the Xerox Nuvera Safety and Certifications Guide for information on this topic.

Power Saver Mode

The capability to enter and exit Power Saver Modes is required to control power consumption during
long periods of system inactivity and to comply with EPA's ENERGY STAR regulations for energy savings.
The system has three Power Saver modes:
• Low Power Mode (LPM)
• Monitor Off Mode (MOM)
• Sleep Mode (SM)
The monitor will shut off (black screen) when the machine goes into any of the Power Saver modes.
16-2
Xerox
®
Nuvera
User Guide and Training Aid (UGTA)
®

Advertisement

Table of Contents
loading

Table of Contents