Problem Solving
5. Check the fluid level of the Thermal Controller (the fluid level . Use the figure as a
reference for when the fluid level is normal and when more fluid is required to be
added to the Thermal Controller.
Figure 5. Sight gauge of Thermal Controller
The fluid level should always be above this line.
1
Note
The sight gauge is located on the left side of the Thermal Controller (from the front
of the unit).
Result
Unable to determine fluid
level.
The fluid level is below the
line shown in
Figure
The fluid level is above the
line shown in
Figure
5-8
Action
Contact Xerox for assistance.
Contact Xerox for assistance.
5.
Continue with the next step.
5.
Xerox
®
CiPress 325 / 500 Production Inkjet System
Customer Help Information