Xerox CiPress 325 Customer Help Information page 152

Problem Solving
XPE-15-22XX Faults
XPE-15-2280
Remedy:
Ensure that the Image Sensor Glass is
1.
2. Check prints for image quality defects. See
Overview.
3. If the image is printing too close to the edge of the web, run
610 Image Registration.
4. If the fault continues to occur, contact Xerox for assistance.
XPE-15-2282
Remedy:
1. Ensure that the Image Sensor Glass is
2. Check prints for image quality defects. See
Overview.
3. If the image is printing too close to the edge of the web, run
610 Image Registration.
4. Run the Converge Roll Phase of
5. If the fault continues to occur, contact Xerox for assistance.
XPE-15-2283
Remedy:
1. Ensure that the Image Sensor Glass is
2. Check prints for image quality defects. See
Overview.
3. If the image is printing too close to the edge of the web, run
610 Image Registration.
4. Run the Converge Roll Phase of
5. If the fault continues to occur, contact Xerox for assistance.
5-50
clean.
Image Quality
clean.
Image Quality
DC 141 Head Setup.
clean.
Image Quality
DC 141 Head Setup.
®
Xerox CiPress 325 / 500 Production Inkjet System
These faults are
related to an
image analysis
failure while
running Color
Patches in Job.
DC
DC
DC
Customer Help Information