Normal Power-On Checking For Components - Huawei FusionModule1000B V100R003C00 Commissioning Manual

Water-cooled it solution

Table of Contents

FusionModule1000B Water-Cooled IT Solution

Commissioning Guide



Preparations

Tools: none

Document required: initial configuration parameter manual

Skill requirement: power distribution system engineer

Procedure

Step 1 Switch on the external input circuit breaker.

Step 2 Power on the FusionModule1000 level by level by referring to the general power-on

commissioning process and power supply and distribution system diagram.

Step 3 Switch on the power supply circuit breaker to power on the equipment.

Step 4 Verify that the power-on process is normal by referring to

for

Step 5 (Optional) If initial configurations are involved, verify that the initial parameter values are

correct by referring to the initial configuration parameter manual.



----End

6.3 Normal Power-On Checking for Components

Table 6-1

Issue 02 (2017-01-10)

Before the lighting system is powered on, prepare a portable light or open some of the

container doors.

Circuit breakers of various specifications are reserved in the power supply system. If any

of these circuit breakers are used, conduct proper operations on them for the

commissioning.

For equipment with dual power inputs, circuit breakers of both power inputs must be switched on.

Components.

Initial configurations must be verified before the first power-on or restart after a long

power-off period.

Equipment with initial configurations can be powered on only after the initial

configurations are verified.

describes the checking items after components are normally powered-on.

For details about initial configuration parameters in the FusionModule1000, see the initial configuration

parameter manual for the solution in use.

Huawei Proprietary and Confidential

6 Power-On Commissioning

6.3 Normal Power-On Checking

Table of Contents