Checking Components - Huawei OceanStor V3 Series Quick Installation Manual

1 Installation Preparations
1a
Checking installation tools
The following installation tools are required:
 Phillips screwdriver (M3 to M6)
 Flat-head screwdriver (M3 to M6)
 Diagonal pliers
 Floating nut mounting bar
1c

Checking components

Only materials involved in the installation process are listed here. The Packing List contains all materials required by the installation. The bag
containing the Packing List is attached to the outside of the carton.
Each controller of the OceanStor 5300 V3 is equipped with four 1 Gbit/s iSCSI host ports. Each controller enclosure of the OceanStor 5500
V3 is equipped with four smartIO host ports that do not support IP scale-out networking. In the following sections of this document, the
installation procedure is described using the OceanStor 5500 V3 as an example. The procedure for install the OceanStor 5300 V3 is similar.
Controller enclosure (2 U)
Disk enclosure (2 U)
Installation template (for
4 U devices)
Installation template
Front panel of a
(for 2 U devices)
2 U device
Ground cable
Floating nut and M6 screw
Front panel of a 4 U
device
Mini SAS HD electrical Mini SAS HD optical
cable
1b
Checking circuit breakers
NOTICE
A storage system power failure may cause devices connected
to the same circuit breaker to power off unexpectedly.
Therefore, ensure that the storage system power supplies
have functioning circuit breakers with the following amps:
 AC power: 16 A
 DC power: 32 A
Disk enclosure (4 U)
High-density disk enclosure (4 U)
Cable tray Adjustable guide rails
Multi-mode optical fiber
cable
3
Bearing guide rails
Network cable
cable