Table of Contents
Advertisement
FusionModule1000B Water-Cooled IT Solution
Commissioning Guide
Figure 9-7 Teamwork setting screen 2
Table 9-8 Teamwork setting description
Paramete
r
Teamwork
unit no.
Teamwork
unit
address
Teamwork
function
Network
Total
number of
units
Issue 02 (2017-01-10)
Description
A maximum of four groups (1 to 4)
can be set.
Indicates the address (1 to 32) of a
precision air conditioner in a group.
Indicates whether to disable or
enable the teamwork function.
Disable: A unit operates
independently.
Enable, a unit operates in team
with other units.
Indicates the networking mode for
the teamwork.
Indicates the number of precision air
conditioners in a group. The value is
an integer ranging from 1 to 32.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Commissioning Core Components
Configuration Principle
Group precision air conditioners in
adjacent areas as one, that is, assign
one group number for them.
Addresses in the same group must
be unique, and the address of the
master unit must be set to 1.
Set the value to an integer in the
range from 1 to the number of
devices in the current group. If the
address of a device exceeds the
range, the device cannot enter the
teamwork group.
If an address in the range is not
configured, the teamwork topology
shows that this device is offline.
Set this parameter based on the onsite
device heat distribution.
Set this parameter to CAN.
Set this parameter to the number of
precision air conditioners in a group.
88
Advertisement
Table of Contents
