Commissioning Fire Extinguishing Devices (Standard); Commissioning The Fire Alarm Control Panel (Standard) - Huawei FusionModule1000B V100R003C00 Commissioning Manual

Water-cooled it solution

Table of Contents

FusionModule1000B Water-Cooled IT Solution

Commissioning Guide

9.4 Commissioning Fire Extinguishing Devices (Standard)

Prerequisites

Initial configuration parameters have been set for the fire alarm control panel before delivery

and do not need to be set onsite.

Preparations

Tools: none

Documents required: power supply and distribution system diagram, documents delivered

with the agent releasing control panel, fire extinguishing system conceptual diagram

(standard), fire extinguishing device layout diagram (standard)

Skill requirement: fire engineer

Procedure

Step 1 Switch on the input power circuit breaker of the fire alarm control panel for the protected area

by referring to the power supply and distribution system diagram.

Step 2 Switch on the active and standby power supply to power on the fire alarm control panel.

Figure 9-13 Positions of power switches

If the power indicator is on and other indicators are off, the power-on process succeeds. If a

yellow fault indicator is on, rectify the fault before continuing follow-up operations.

Issue 02 (2017-01-10)

For the diagrams, see the initial configuration parameter manual for the solution in use.

Huawei Proprietary and Confidential

9 Commissioning Core Components

Table of Contents