Checking Components - Huawei OceanStor T Series Quick Installation Manual

1 Installation Preparations
1a
Checking installation tools
The following installation tools are required:
 Phillips screwdriver (M3 to M6)
 Flat-head screwdriver (M3 to M6)
 Diagonal pliers
 Floating nut mounting bar
1c

Checking components

Controller enclosure (2 U)
Disk enclosure (4 U)
Installation template
Front panel of a 4 U
(for 4 U devices)
disk enclosure
Installation template
Front panel of a 2 U
(for 2 U devices)
controller enclosure
Mini SAS HD cable
Mini SAS cable
 2 U controller enclosures support two types of disks, 12-slot 3.5-inch disks and 24-slot 2.5-inch disks.
 For information about the full list of required components, see the Packing List. The bag containing the
Packing List is attached to the surface of the box.
1b
Checking circuit breakers
A storage system power failure may cause devices connected
to the same circuit breaker to power off unexpectedly.
Therefore, ensure that the storage system power supplies have
functioning circuit breakers with the following amps:
AC power: 16 A
Adjustable
Floating nut and
guide rails
M6 screw
Multi-mode optical
Mini SAS HD to
fiber cable
mini SAS cable
3
Disk enclosure (2 U)
High-density disk enclosure (4 U)
Bearing guide rails
Network cable
Cable manager
Ground cable