Commissioning The Fire Extinguishing System (Standard) - Huawei FusionModule1000B V100R003C00 Commissioning Manual

FusionModule1000B Water-Cooled IT Solution
Commissioning Guide
Documents: NetEco Commissioning Guide, NetEco Administrator Guide, monitoring
component layout, initial configuration table of the management system
Skill requirement: weak-current engineer familiar with the management system
Procedure
Step 1 Start the management system on the operation terminal. For details, see the NetEco
Commissioning Guide.
Step 2 Enter the initial user name and password on the NetEco WebUI to log in to the management
system.
Step 3 Check the connections of all monitoring devices by referring to the monitoring device layout
diagram.
Verify that all devices in the initial configuration table communicate with the management
system properly.
Step 4 Check that the views and videos in the management system are consistent with the running
status of the data center. For details, see NetEco Commissioning Guide and NetEco
Administrator Guide. If any inconsistency is found, contact Huawei technical support.
----End
7.4 Commissioning the Fire Extinguishing System
(Standard)
Prerequisites


Issue 02 (2017-01-10)

For the diagrams and tables, see the initial configuration parameter manual for the solution in use.

The NetEco Administrator Guide and NetEco Commissioning Guide are integrated in the iManager
NetEco Product Documentation.
The fire alarm control panel has been powered on.
The management system is working properly.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 System Commissioning
47