Table of Contents
Advertisement
FusionModule1000B Water-Cooled IT Solution
Commissioning Guide
Step 3 Tap Indicates on the main screen, and tap Confirm on the dialog box that appears. If the start
succeeds, the system prompts that the command is successfully executed.
----End
9.2.2.1 Initial DIP Switch Configuration for T/H Sensors
Prerequisites
You have powered on the 30 kW chilled water precision air conditioners.
Preparations
Tools: none
Document required: initial DIP switch settings table for the remote T/H sensor of the 30 kW
chilled water precision air conditioner
Skill requirement: cooling engineer
Context
Each 30 kW chilled water precision air conditioner is equipped with three remote T/H sensors
at the air return vent. A maximum of six remote T/H sensors can be configured.
You need to set the DIP switches for the remote T/H sensors before using the sensors.
Issue 02 (2017-01-10)
When powering on and commissioning the 30 kW chilled water precision air conditioner,
you are not allowed to modify the initial configurations of the 30 kW chilled water
precision air conditioner unless you are authorized by onsite Huawei engineers.
For the initial DIP switch configuration for the remote temperature sensor, see
Initial DIP Switch Configuration for T/H
For the initial DIP switch configuration for the main control board, see
Configuration for the Main Control
For the initial teamwork configuration, see
For the initial configuration of temperature and humidity, see
of Temperature and
Humidity.
9.2.2.3 Teamwork Initial Configuration
and Humidity
must be configured after power-on.
For the tables, see the initial configuration parameter manual for the solution in use.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9 Commissioning Core Components
Sensors.
Board.
9.2.2.3 Teamwork Initial
and
9.2.2.4 Initial Configuration of Temperature
9.2.2.1
9.2.2.2 Initial DIP
Configuration.
9.2.2.4 Initial Configuration
82
Advertisement
Table of Contents
