FusionModule1000B Water-Cooled IT Solution
Commissioning Guide
3.
Step 13 (Optional) Check whether the fire alarm signals are reported to the management system.
Step 14 Flip the Enable Control key rightwards, reset the extinguishant control panel by pressing
Reset on it, and then flip the Enable Control key leftwards to reset the key.
----End
Issue 02 (2017-01-10)
Figure 7-29 Loop 2 FAULT RELAY indicator on
Hold the heat detector, and rotate it clockwise to install it to the base.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 System Commissioning
65