Operating Environment; Electrical Requirements; Feature Specifications - Xerox Work Centre 7970i Customer Expectation & Installation Manual

Detailed Specifications

Foreign Device Interface (FDI) (Optional)- Also known as
Auxiliary Access Device, this is an interface to third party access
control devices, such as coin machines and card readers.

Operating Environment

Operating
Environment
Required Temperature
Range
Required Relative Humidity
Altitude (above sea level)
Sound Power Levels (Base
config)
Sound Pressure Levels
(Base config)

Electrical Requirements

Geographies: Western Hemisphere:
North America
Electrical 7970/7970i Engine
Voltage
Voltage : 110-127
VAC +/- 10%
Frequency: 50/60 Hz
+/- 3%, 20 A
Receptacle NEMA part #: 5-20R
Power cord 8.5 Feet
Length
Geographies: Eastern Hemisphere :
Europe / Asia / South America / Africa
Electrical 7970/7970i Engine
Voltage Voltage : 220-240
VAC +/- 10%
Frequency: 50/60 Hz
+/- 3%, 10 A
Receptacle Requires use of a 10 ampere outlet which is standard
in most modern office buildings. Consult with local
service to determine the country specific receptacle
and confirm the existence of this outlet in the proposed
installation space.
Power cord 2.3 meters
Length
3
The first print and copy out times were measured with machine in
ready condition, image quality setting at defaults,
Reduction/Enlargement at 100%, uncollated, selecting and feeding a
8.5x11 LEF / A4 LEF plain paper sheet from tray 1 in black or full color
respectively and feeding to the bottom center tray without any finisher
installed. Priority mode set to color or black and white as appropriate.
The first copy out time (FCOT) is measured from when the Start
button is pressed to when the trail edge of the first copy is output to the
specified destination.
Customer Expectation and Installation Guide
7970/7970i
50° to 82° F (10° to 28° C)
15% to 85% RH
Max of 8,200 Feet (2,500 meters)
Operating: 7.6 LwAd (B)
Standby: 3.5 LwAd (B)
Operating: 58 LpAd (dBA)
Standby: 17 LpAd (dBA)
7970/7970i C/Z Folder
Voltage : 110-127 VAC +/-
10%
Frequency: 50/60 Hz +/- 3%,
15A
NEMA part #: 5-15R
8.5 Feet
7970/7970i C/Z Folder
Voltage : 220-240 VAC +/-
10%
Frequency: 50/60 Hz +/- 3%,
10 A
2.3 meters
Electrical Requirements
Power Consumption
Running (Average)
Standby Mode
Low Power Mode
Warm up from Power off
Recovery from Low
Power
Sleep Mode

Feature Specifications

Print
First Print As fast as 6.9 sec / 4.2 sec.
3
Out Time
Color / B&W
Resolution Up to 1200 x 2400 dpi
Printing registration specifications for 8.5 x 11"
Registration
(A4):

Tray 1-4: ±1.5 mm (side 1), ±1.9 mm (side 2)
along the lead edge and ±2.0mm (side 1),
±2.4mm (side 2) mm along the side edge

Bypass Tray: Lead Edge is ±2.2 mm and Side
edge ±3.0 mm
Skew registration specification from side-to-side
feeding for 8.5 x 11" (A4)

Tray 1-4 is ±3 mm (side 1), ±4 mm (side 2)
Bypass tray skew is ±4 mm.
The product will reproduce 11"x17" full bleed image
Max
when printing on 12"x18" paper and A3 full bleed
Printable
Area when printing on SRA3 paper. The maximum
length images (476.6mm) are only produced on
media 19" long. On all media there is a Lead Edge
deletion of 4mm and a Trail Edge deletion of 2mm.
The Side Edge deletion varies with paper size. For
paper less than 12" wide the Side Edge deletion is
2mm per edge. For widths greater than 12" the
Side Edge deletion is determined by the paper
width less the imageable area divided by 2.
Print:

Max. Image Area: 305mm x 476.6mm / 12" x
18.76"

Guaranteed Image Quality Area : 297mm x
476.6mm /11.69" x 18.76"
Copy:

Max. Image Area: 297mm x 432mm / 11.69" x
17"
The first print out time (FPOT) is the duration from the Print Job
request to the delivery into the output tray. Overall system print
performance ('Click to Clunk' time) is primarily dependent upon the
software applications and network environment being used.
Rasterizing (RIP-ing) is only a small fraction of Click to Clunk time.
®
WorkCentre 7970 Series
7970/7970i 7970/7970i
110-127V 220-240V
1022 watts 1005 watts
89 watts 116 watts
84 watts 94 watts
As fast as 166 As fast as 166
seconds seconds
4 seconds 4 seconds
3.0 watts
3.5 watts
(Default time to
(Default time to
Sleep mode = 2
Sleep mode = 2
min.)
min.)
7970/7970i
4