Fire Alarms (Ce); Temperature Alarms - Huawei IDS1000-A Maintenance Manual

IDS1000-A Air-Cooled Container Data Center
All-in-One Maintenance Guide
A fire can seriously affect the stable running of the system and equipment safety. Therefore,
any fire alarm must be immediately handled.

4.8 Fire Alarms (CE)

Fault
Category
LOCAL
FIRE
FAULT
RELAY
A fire can seriously affect the stable running of the system and equipment safety. Therefore,
any fire alarm must be immediately handled.

4.9 Temperature Alarms

Fault
Category
Overtemp
erature
Issue 01 (2016-01-10)
Alarm Symptom
Severity
Critical For details about how to handle a gas release fire alarm, see
Emergency Operations for a Gas Release Alarm
Major See the documents delivered with the fire control panel.
Alarm Symptom
Severity
Critical The onsite
temperature is too
high.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Possible Troubleshooting
Cause
Possible Troubleshooting
Cause

The air Check whether the
conditioners are circuit breaker is
powered off. OFF in the PDC.

Check whether the
air conditioner
power cables are
connected properly.
The air Turn on the air
conditioners are conditioners.
not turned on.
The air Verify that the initial
conditioner is configurations of the
not properly air-cooled precision air
set. conditioner are
consistent with the
initial configuration
requirements initial
configuration guide.
4 Alarms and Faults
6.13
(CE).
53