Huawei IDS1000-A Maintenance Manual page 125

IDS1000-A Air-Cooled Container Data Center
All-in-One Maintenance Guide
Skill requirement: weak-current engineer
Procedure
Step 1 Remove the emergency door release button.
1.
2.
3.
4.
Figure 5-34 Removing the emergency door release button
Step 2 Install a new emergency door release button
1.
2.
3.
4.
Figure 5-35 Installing the emergency door release button
Step 3 Check that the new emergency door release button is working properly.
Issue 01 (2016-01-10)
Remove screws securing the emergency door release button, as shown by 1 in
5-34.
Remove the glass panel of the emergency door release button, as shown by 2 and 3 in
Figure 5-34.
Remove screws securing the base, as shown by 4 in
Disconnect cables and remove the emergency door release button.
Connect cables.
Tighten screws on the base, as shown by 1 in
Install the glass panel, as shown by 2 and 3 in
Tighten screws, as shown by 4 in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure
Figure 5-35.
Figure 5-35.
Figure 5-35.
5 Parts Replacement
Figure
5-34.
117